Auto-Gate Remote Duplication & Replacement in Malaysia
Need a spare auto-gate remote, or lost the only one? Whether a GPPKM-affiliated locksmith can simply clone your remote on the spot, or has to pair a new one at the gate’s control board, depends on one thing: is your remote a fixed (learning) code or a rolling code? This page explains the difference, which Malaysian auto-gate brands use which, and how a mobile locksmith handles each — usually same-day at your gate.
Quick Answer: Auto-Gate Remote Pricing in Malaysia (2026)
- Clone a fixed/learning-code remote (you have a working one): RM 35–80
- New rolling-code remote + pair at control board: RM 80–200 depending on brand
- All remotes lost (re-sync at the board): RM 100–250
- Turnaround: on-site at your gate, usually same day
Indicative ranges from independently set locksmith quotes, Q2 2026. Final price depends on remote type, brand, and whether a working remote exists. The Platform does not set, hold, confirm, or arbitrate prices.
Fixed Code vs Rolling Code — This Decides Everything
Auto-gate remotes in Malaysia fall into two families, and the type determines whether your remote can be copied in two minutes or needs to be taught to the gate’s control board.
| Fixed / learning code | Rolling code | |
|---|---|---|
| How it works | Sends the same code each time (often set by DIP switches or learned once) | Code changes every press (encrypted) to defeat copying |
| Can a locksmith clone it? | Yes — copied onto a blank/clone remote on the spot if you have a working one | No straight clone — a new remote must be paired at the control board’s learn/STUDY button |
| If all remotes are lost | Clone not possible (nothing to copy) — pair a fresh remote at the board | Pair a fresh remote at the board; may need to clear old remotes from memory |
| Frequency | Commonly 330 MHz or 433 MHz | Typically 433 MHz, encrypted |
If you still have one working remote and it’s a fixed/learning code, duplication is quick and cheap. If it’s a rolling code (or you’ve lost every remote), the locksmith pairs a new remote directly at the gate controller using its learning button — still an on-site, same-day job, priced directly by the technician. The Platform does not set, hold, confirm, or arbitrate prices.
Common Malaysian Auto-Gate Brands
Most Malaysian landed homes use one of a handful of auto-gate systems. A locksmith identifies the brand and remote type before quoting — the final price is agreed directly with the technician. The Platform does not set, hold, confirm, or arbitrate prices.
| Brand | Typical Code Type | Frequency | On-Site Clone Feasibility |
|---|---|---|---|
| DNOR | Fixed / newer rolling code (e.g. the Turbo series) | Very common | Fixed-code: cloned on-site; rolling-code remotes are paired/linked at the controller rather than cloned |
| E-MAX, OAE, AGD, Giant, MAG | Mix of fixed and rolling code, depending on model | Widely installed | Older units are often clone-able on-site; newer ones pair at the board |
| Generic DIP-switch remotes | Classic fixed code (8 DIP switches) | 330/433 MHz | The easiest and cheapest to duplicate on-site |
Tip: the brand is usually printed on the remote or the gate’s control box. Snapping a photo of both speeds up the job and helps the locksmith bring the right blank remote.
Need a Remote Today? Do This First
- Check the remote battery. A dead 12V/23A or CR2032 cell is the most common “dead remote” — try a fresh battery before assuming it’s faulty.
- Bring/keep a working remote if you have one. A fixed-code remote can be cloned from it in minutes; without one it becomes a pair-at-the-board job.
- Identify the brand + remote type. Photograph the remote and the control box (usually near the gate motor) so the locksmith brings the right blank.
- For lost-all-remotes, mention it — the locksmith will also clear old remotes from the controller’s memory so a lost remote can’t open your gate.
Common Questions — Auto-Gate Remotes
Can you duplicate my auto-gate remote on the spot?
If it’s a fixed/learning-code remote and you have a working one, yes — it’s cloned onto a blank remote in minutes. If it’s a rolling-code remote (common on newer DNOR and similar), there’s no straight clone; the locksmith pairs a new remote at the gate’s control board using its learn/STUDY button. Both are on-site, same-day jobs.
I lost all my remotes — can I still get a new one?
Yes. With no remote to copy, the locksmith pairs a brand-new remote directly at the controller. For security, ask them to also clear the old remotes from the board’s memory so a found/stolen remote can no longer open your gate. (Rolling-code systems have a limited number of remote “slots”, so old ones may need clearing anyway.)
My remote stopped working — is it broken or just the battery?
Check the battery first; a flat cell is by far the most common cause. If a fresh battery doesn’t help, the remote’s board may be worn or water-damaged, or the controller may have lost its pairing after a power trip — a locksmith can test and either repair, clone or re-pair as needed.
How many remotes can my gate hold?
It depends on the controller — many auto-gate boards hold a fixed number of paired remotes. When it’s full, adding a new one means clearing memory and re-pairing the ones you want to keep. The locksmith handles this during the visit.
Get an Auto-Gate Remote Sorted Today
MyLock.my dispatches verified GPPKM-affiliated locksmiths who duplicate and pair auto-gate remotes across Malaysia — on-site at your gate, fixed-code or rolling-code. Each job is priced directly by the technician on WhatsApp. The Platform does not set, hold, confirm, or arbitrate prices.
See also access-card duplication and our full key duplication directory.
Trademark notice: “DNOR”, “E-MAX”, “OAE”, “AGD” and other names are trademarks of their respective owners. MyLock.my is not affiliated with, endorsed by, or sponsored by any of these manufacturers. References are made under nominative fair use solely to describe the locksmith services available. A locksmith will only duplicate or pair remotes for the verified owner/occupant of the property. All trademarks are property of their respective owners.